[hotrob1]

We have a Fanuc 16-TT and we are trying to change mm to inches. According to the info I have it is parameter 0000 bit #2 INI. We now have a "0" which is metric and it needs to be a "1" for inches. I have changed the PWE to enable but cannot get the bit changed. How do I change from mm to inches on a Fanuc 16-TT???

Machine is down so any help will be greatly appreciated!

Thanks in advance. The only manual I have is the operator's manual for series 16.

[hotrob1]

I also tried changing it in the "offset setting" under input unit. What do you mean by password? I know what a password is, but can you give a better description or step by step? Thank you.

[Dan Fritz]

Have you tried entering a "G21" in MDI mode? That should change the input unit from inch to metric, and also the position displays.

[hotrob1]

Thanks Dan. What screen do I need to be in to do that? I selected MDI mode and enter G21 under program. Is that correct?

[underthetire]

You should be able to just change it in the setting page. Remember you need to be in mdi to do it.

[hotrob1]

I had to change parameter 1004, bit 0 to 1 before it let me do anything. Thanks all!!!