Originally Posted by
howd
Hi diye; I could, and would certainly make you up one of those. It would be better to make just the collar, tho; I have no way to put the hex drive on the bolt head. A rotery broach would do it, I just do'nt happen to have one. If you have a set of radius guages, you could measure up the radius of the cut-outs. Or if you want to send it to me, I have the guages. Or, if its not of critical dimension, you could give a good guess on it. Is this off of your gantry mill? That is one sweet lookin machine!! If you want, it would be a piece of cake to run off several of these once it's programmed. But if you really only need the one, it would probly be quicker to just spin one out on the manual lathe. If you would like, you can give me a ring 406-868-1260. I would need to know what material you would want this made of. Also I would need the dimensions. Thanks, Howard. R&R Machine.