Iam doing some experimenting with plunge roughing in V28 and cant seem to modify the start point of the cutter. As you know, most plunge cutters arent center cutting, so I cant just slam the tool into the material.
Any help is appreciated.
-Geoff
Iam doing some experimenting with plunge roughing in V28 and cant seem to modify the start point of the cutter. As you know, most plunge cutters arent center cutting, so I cant just slam the tool into the material.
Any help is appreciated.
-Geoff
-Geoff Warner
VegasCarts.com & myVegasCarts.com