Please see attachement for quote. I need quotes for 1000 and 2000 pieces. Sorry for the hand drawing. I will send a sample to the bid winner.
Please see attachement for quote. I need quotes for 1000 and 2000 pieces. Sorry for the hand drawing. I will send a sample to the bid winner.
We're looking at it. Has anyone replied yet?
yes, one bid is in
I hope the person who replied told you that your 15 degree face angle cannot meet a sharp edge without burr issues. Either a flat needs to be designed into that area or each part will need hand deburred and you will end up with a radius there. Usually people bid away here with out asking relevant questions. If these were metal parts you could leave a sharp edge and tumble a radius on, but this is plastic, which you can't tumble,these will need attention by hand, driving the price up. Unfortunately most will overlook this and bid anyway.
Dualkit
There is no problem if you needed to tumble the plastic part, Plastic parts tumble very well, You could machine this part without a burr, you just need to know how
Mactec54
Quote sent
$1.78 for each at a quantity of 2000
$2.98 for each at a quantity of 1000
You like that dumb @$$, open bidding is stupid, don't do it!
No this is not a actual bid, to cheap for us, and I'm sure their workmanship shows it.
Haven't been on in a while. We are machine shop specializing in plastics. Have you already purchased these parts?
I passed this onto our sales dept. Would love to do the work!
1000 @ $2.88,
2000 @ $2.63, 4-6 weeks delivery
PM if interested
Dualkit
No pot shots taken at you, just the facts, that you would not of said what you did if you had known how to make the part
No I did not bid on the part,I have to much work on, or I would have bid, if I had of bid on the part it would of been much less than the prices, that were put up on here
Mactec54
dstryr
Yes I have 2 very active shops
Mactec54