I was hoping someone with XR4/5 could import this IGS file and tell me if they have any issiues with the import. I the Cad/Cam I'm useing has a hard time reconizing the holes, it thinks it's made up separate arcs with different Radius.
Thanks.
Thread: File import ?
Results 1 to 7 of 7
-
03-08-2012, 12:51 AM #1
Registered
- Join Date
- Jul 2007
- Posts
- 378
File import ?
-
03-08-2012, 12:54 AM #2
Registered
- Join Date
- Jul 2007
- Posts
- 378
Opps!!
Looks like you cant upload IGS files.
-
03-08-2012, 02:07 AM #3
Gold Member
- Join Date
- May 2004
- Posts
- 4519
ZIP it.
-
03-08-2012, 11:37 PM #4
Registered
- Join Date
- Jul 2007
- Posts
- 378
Thanks Guys.
-
03-08-2012, 11:41 PM #5
Gold Member
- Join Date
- May 2004
- Posts
- 4519
Looks like this:
-
03-09-2012, 02:33 AM #6
Moderator
- Join Date
- Mar 2003
- Posts
- 927
Here it is in OneCNC XR4..(XR5 was the same)..the file only contains 27 faces..you would need 28 to include the back surface with holes cut thru it..
Appears to be a bad export.
Took 10 seconds to fix / add the missing surface.. The green one.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
03-13-2012, 01:13 AM #7
Registered
- Join Date
- Jul 2007
- Posts
- 378
WOW, thanks for the screen shots.
10 seconds to repair the model seems much more resonable to me then Cam system I'm using now.
Reply With QuoteSimilar Threads
-
Import stp file in NX
By blmmdes in forum UG NXReplies: 2Last Post: 09-11-2008, 03:40 AM -
import .SAT file
By Tinmuk in forum SurfcamReplies: 1Last Post: 07-23-2007, 10:28 PM -
file import(again)
By swarfmacdaddy in forum CNC (Mill / Lathe) Control Software (NC)Replies: 4Last Post: 06-12-2005, 01:57 PM -
file import
By swarfmacdaddy in forum CNC (Mill / Lathe) Control Software (NC)Replies: 3Last Post: 06-07-2005, 08:01 AM -
file import
By motomitch1 in forum OneCNCReplies: 1Last Post: 03-25-2005, 04:08 AM
Posting Permissions
