Originally Posted by
jvangelder
You can change the G30's to whatever you want, you can make the g30 location's (there are 3) on the other side of the spindle if you wanted and watch as the machine tries like hell to get there. I belive you can even change the G28 location, not that you would want to, nice to have a zero location you can call.
I dont think you need a ladder mod for the sub either
You could do tool changes at G30 W0 U0 G28 B0
or G30 P3 W0 U0 B0
(g28 is first ref, g30 is second or g30 p2 is second ref, g30 p3 is third ref, g30 p4 is 4th ref)
Can you not do tool changes with the sub at g30 b0? i belive i can?
I dont know if i can run multi m's in a block, i havent tried.
Fwiw, our other fanuc machines that can use muilti m codes isnt really worth it. Usualy its just M3/4/5 with an m7/8/9 etc, not something that really saves time
-Jacob