Good morning community, i will show you what i'm doing...
i have an old Lathe DI PALO and i decided to retrofit with a cnc system...
i started with the project, and bought all the necessary to make that work:
30 mm INA linear guide for the axis;
20-05 THK balls screw with ballnut for short axes;
25-05 balls screw with double ballnut THK for long axes;
2 servomotors leadshine with relative servodriver 400w for the axis;
1 servomotor MAB with DigitAx driver 1.5 KW for the spindle;
all the necessary for the lubrification and to make it works.
here you can see the first fothos of the lathe, with the project and the starting works...