[Larry83301]

Thanks Larry.

Here is one of my newest one. I got this idea from the internet

Sent from my SGH-I747 using Tapatalk 2

Kinda looks like this one on Plasmaspider.com



Larry

[colbyj1986]

I saw it on zombiehammer.com I had to change it up a little

Sent from my SGH-I747 using Tapatalk 2

[tsinos]

I would like to thank you guys for sharing
This is what I try.
[ame=http://www.youtube.com/watch?v=Foh2RiKbUDo]Cnc engraving Azdec calendar - ?????????? ??? ??????? - YouTube[/ame]

[colbyj1986]

I would like to thank you guys for sharing
This is what I try.
Cnc engraving Azdec calendar - ?????????? ??? ??????? - YouTube

Dude that is a serious job. Takes what 5 hrs to complete

Sent from my SGH-I747 using Tapatalk 2

[cd_edwards]

I would like to thank you guys for sharing
This is what I try.
Cnc engraving Azdec calendar - ?????????? ??? ??????? - YouTube

If you limit your depth of cut, the face in the middle will turn out alot better with more definition to it. I've cut alot of these.

[tsinos]

If you limit your depth of cut, the face in the middle will turn out alot better with more definition to it. I've cut alot of these.

Thank you very much for the info. :wave:

Can you please shear the file? because your have much better details than mine.
What type of knives do you use?

[cd_edwards]

Thank you very much for the info. :wave:

Can you please shear the file? because your have much better details than mine.
What type of knives do you use?

well I only have it in a vcarve/aspire file. Like I said though, limit the max depth of cut to 0.4 inches and use a 1/4" 90 degree vbit. Mine are Whiteside bits. if you don't limit the DOC, you'll find that depending on the bit, it will go right through the board and into your spoil board..

www.thebadbeaver.com

[metal-madness]

I like your version better.. Can you post the .DXF ??? The Zombie hammer that is !!!

[sqatch]

I like your version better.. Can you post the .DXF ??? The Zombie hammer that is !!!

Be carefull this might be a restricted wepon.

[colbyj1986]

Be carefull this might be a restricted wepon.

Sqatch ,

You are right in some places this would be a dangerous weapon.

https://docs.google.com/file/d/0B-rE...lZS21Tdms/edit

Here it is from my drive, I can't upload this one from the PC as I am not at the house .

And I take no responsibility if it is illegal to have in certain areas.

Sent from my SGH-I747 using Tapatalk 2



I changed the settings for people that could not open it

[sqatch]

[QUOTE=colbyj1986;1232284]Sqatch ,

You are right in some places this would be a dangerous weapon.





I'll keep the file on hand in the event of a zombie apocalypse.

[bill south]

Delete Duplicate

[bill south]

CD;
Since this is a thread of sharing, can you post the vectric files (zipped) for your calendar? I'm going to cut a telecaster type guitar body and would like to use the details of you calendar for the face!!
Thanks in advance.
Bill
:cheers:

[keithstanley]

Bill have you got any guitar files to share?

Thanks,

Keith

[sped1530]

Telecaster.

[keithstanley]

Thanks Sped1530 those are great Telecaster files.

Does anyone have the Stratocaster files, my guitar got broke recently and "no one" seems to know how.

So I want to rebuild it with a new body.

Thanks.

[bill south]

Hey Keith;
See if this helps any!
Bill


Thanks CD!
B

[Christian Knüll]

Hi,

something for Valentines day:



Files: herz.zip

Some more Information: www.estlcam.com/herz.php

[ajarn al]

Don't know about Valentines,
but here is something for you football lovers.

[riptide247]

I need this PDF to a DXF this is for a friend and I use my plasma cutter for sheet metal cutting but I think I should be able to cut this out with a little work.

Thanks very much in advance!