I saw it on zombiehammer.com I had to change it up a little
Sent from my SGH-I747 using Tapatalk 2
I would like to thank you guys for sharing
This is what I try.
[ame=http://www.youtube.com/watch?v=Foh2RiKbUDo]Cnc engraving Azdec calendar - ?????????? ??? ??????? - YouTube[/ame]
Colten Edwards http://www.cncsigns.ca
well I only have it in a vcarve/aspire file. Like I said though, limit the max depth of cut to 0.4 inches and use a 1/4" 90 degree vbit. Mine are Whiteside bits. if you don't limit the DOC, you'll find that depending on the bit, it will go right through the board and into your spoil board..
www.thebadbeaver.com
Colten Edwards http://www.cncsigns.ca
I like your version better.. Can you post the .DXF ??? The Zombie hammer that is !!!
Sqatch ,
You are right in some places this would be a dangerous weapon.
https://docs.google.com/file/d/0B-rE...lZS21Tdms/edit
Here it is from my drive, I can't upload this one from the PC as I am not at the house .
And I take no responsibility if it is illegal to have in certain areas.
Sent from my SGH-I747 using Tapatalk 2
I changed the settings for people that could not open it
[QUOTE=colbyj1986;1232284]Sqatch ,
You are right in some places this would be a dangerous weapon.
I'll keep the file on hand in the event of a zombie apocalypse.
Delete Duplicate
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
CD;
Since this is a thread of sharing, can you post the vectric files (zipped) for your calendar? I'm going to cut a telecaster type guitar body and would like to use the details of you calendar for the face!!
Thanks in advance.
Bill
:cheers:
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
Bill have you got any guitar files to share?
Thanks,
Keith
Telecaster.
Thanks Sped1530 those are great Telecaster files.
Does anyone have the Stratocaster files, my guitar got broke recently and "no one" seems to know how.
So I want to rebuild it with a new body.
Thanks.
Hey Keith;
See if this helps any!
Bill
Thanks CD!
B
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
Hi,
something for Valentines day:
Files: herz.zip
Some more Information: www.estlcam.com/herz.php
My CAM Software and CNC Controller: www.estlcam.com
Don't know about Valentines,
but here is something for you football lovers.
I need this PDF to a DXF this is for a friend and I use my plasma cutter for sheet metal cutting but I think I should be able to cut this out with a little work.
Thanks very much in advance!