I am a newbie and living in HK.
I try Vcarve pro to creat the pocket toolpath but it is missing some toolpath. Please help.
I am a newbie and living in HK.
I try Vcarve pro to creat the pocket toolpath but it is missing some toolpath. Please help.
Without a look at the file your trying to create, I would guess that the tool your specifying is too large to cut those areas that are missing. Use a smaller tool until all areas are cut.
B
billyjack
Helicopter def. = Bunch of spare parts flying in close formation! USAF 1974 ;>)
Thanks for your reply, yes, I try to use smaller tool until all areas are cut. It's work but use END MILL 0.3MM only, Attachment 237994
when I try to use another tool, it dis[play error for tools too large (I have try the tool database but not fit it). THX!