[Larry83301]

hello all
March 8 happens if someone can victoriser this image in dxf
thank you

It may need a little cleaning up, but here you go.

Larry

[space67]

hello all
March 8 happens if someone can victoriser this image in dxf
thank you

Here is one , you have to clean it yourself.
Hope you can use it.

[kkberg]

Hello,

does someone have a drawing of a 3D Lighthouse puzzle?

Thanks,

Klaus

[skipper_52]

Quick question. Do you have to adjust the slots on the 3d puzzles for the thickness of the material you are using? Common sense says yes.

[Blackadder]

Quick question. Do you have to adjust the slots on the 3d puzzles for the thickness of the material you are using? Common sense says yes.

Quick answer - YES

[Exsecratio]

Quick question. Do you have to adjust the slots on the 3d puzzles for the thickness of the material you are using? Common sense says yes.

Easiest way Skip is to resize the whole puzzle until the slots match your material.

Basically divide the slot size you want by the slot size you have to get the scale then use that as your scaling factor. (4 divided by 3 = 1.33333333) then scale by 1.3333333 (the reverse method also works for making things smaller)

Changing just the slots unless you know a bit about drawings and fit will mean some parts may not go together (they interfere with each other)

best wishes

Dave

[cdrd03]

I thought that the reason to use slots was to use a bit that is the same size as the material. Wouldn't this eleminate having to scale the work.

Chuck

[Exsecratio]

Hiya Chuck,

If the slots were centre lines that may work but once you move into 3 dimensions the relative fit between two parts is as critical as the fit from one part to another. Or picture it as thickness becomes a 3rd dimension.

best wishes

Dave

[Maccarly]

Map holder Pinoccio 100% cleanly, 2 mm wood

[PentueR]

My first piece for this great forum. Maked from 6mm MDF and some plexiglass..

Enjoy!

PentueR

[gmfoster]

Map holder Pinoccio 100% cleanly, 2 mm wood

Maccarly


Looks great..

However your zip file is corrupted...

[Maccarly]

Hier as Vektor-PDF-File

[Maccarly]

Material 18 mm Wood

[Maccarly]

Key Board for Camper

[space67]

Here is a dxf of Pinocchio and a derivative of it with a dragon on it.
Hope you like it

[space67]

Here is a small table you can pull in over the sofa, even in the corner if you want to do to the opening in the middle.
Hope you like it.

[atochero]

Hello friends, Could anyone, who has these models, upload them?
Thanks in advance


Hola amigos, es posible que, alguien que tenga estos modelos en formato dxf, los pueda subir?
Gracias por adelantado

[gmfoster]

Hier as Vektor-PDF-File

That worked thanks..

[space67]

Testing out the machine and software to find out how much you can do on it, and how many different letters and backgrounds one can make.
Here are the first 5 items, hope you like them.:wave:

[DJNPHOTO]

Does anyone have the Chicago bears logo in a dxf file a friend wants one made up