We have an older HTC 400 that we are having problems with the indexer. The indexer is stopping when given any command greater that 30 degrees (1-30 degrees works fine). Indexer stops and control needs to be reset - watching indexer position while returning to home, I do not see a value greater that 30 degrees.
We do get 213 indexer driver malfunction when trying to MDI to 31 degrees
Results 1 to 3 of 3
-
09-16-2009, 06:23 PM #1
Registered
- Join Date
- Jul 2008
- Posts
- 7
Mazak HTC 400 w/ 1 degree indexer
-
10-02-2009, 05:46 PM #2
Registered
- Join Date
- Oct 2008
- Posts
- 13
What does the manual say a 213 alarm is? Maybe the axis has lost its range of travel and needs to be rehomed or setup.
-
10-15-2009, 01:42 PM #3
Registered
- Join Date
- Apr 2009
- Posts
- 31
Please check the Amp
Hello,
How about the machine now ?
What's the state of the Amp of the table during getting 213 # alarm ?
The lamp of the Amp is important !
Reply With QuoteSimilar Threads
-
45 degree bending
By Chuck Pool in forum Bending, Forging, Extrusion...Replies: 6Last Post: 02-21-2009, 05:55 PM -
In one year I will gradeuate with an industrial management degree.WTF is this degree?
By KyleH2 in forum Community Club HouseReplies: 3Last Post: 06-30-2008, 01:30 AM -
90 degree boring
By racear*2865 in forum Vertical Mill, Lathe Project LogReplies: 3Last Post: 09-14-2007, 04:55 AM -
Degree wheel
By kenlambert in forum MetalWork DiscussionReplies: 6Last Post: 02-05-2007, 04:16 AM -
0.9 degree stepper. Use or not?
By jdholbrook in forum Stepper Motors / DrivesReplies: 6Last Post: 05-28-2006, 06:47 AM
Posting Permissions
