Using this tapping program, we are getting a spindle overload alarm on our V2XT when tapping more than 8 positions. Is the spindle RPM of 750 too fast? Should I program a M0 and change to low gear to perform tapping?
Thank you so much.
N2 T2 M6 ;(1/4-28 TAPPED HOLES)
S750 M3
G00 X2.1793 Y-.25
Z.1
G84 X2.1793 Y-.25 Z.18 F26.78
G80
G0 Z.1
M22