[Micky-ttt]

Hello everybody, I'm new here and first of all plese forgive my bad english...
Is there anybody can help me with a Transon TS 1325 Router with DSP offline contol system ?
The problem is to read files, I can create Files with Type3 Software ( 2D and 3D ) but can not let running the files.
Unfortunately I have no description, no handbook and no support from China...( however ?!)
If anybody can give me step by step description ( maybe I am stupid ) ???? or maybe ony tip what I do wrong ?
Again, to crerate the NC file is not the Problem, the problem is only to do
the file in DSP and let the machine running...:withstupi )

[david021688]

Where did you buy this machine ？Wood Router?

[Micky-ttt]

We buy direct in China
Unfortunately the after sales service was ....., the delivery 3 weeks later, the transport boxes damaged, the software not running....
No description, no Handbook, nothing.
Yes woodrouter Transon 1325, 2500 x 1300 mm, Vacuum Table, 4,5 KW Spindle......, I think the machine is good, but that unfortunately is all.
I said to the supplier that I will not pay the last 5% of bill before the machine
is running,....but it seems that they are not interested :tirednuts).
I have more chinese machines but never had this problems.

[david021688]

I think what you buy is 1325C series Wood Router ,The Spindle is 4.5KW water cooling spindle, can you tell me where are you from

[Micky-ttt]

Germany , Black Forrest,
The Router to be exact is TSW 1325.
I hope nobody thing that I only dont want to pay the rest 5% of bill, that's not what I want, I want to test if after transport damages the machine is running ok before I pay the rest, only the supplier dont want to help......,
and as I said before, no description, no handbook, no support :tired:

[david021688]

I agree with you ,you absolutely have reason not paying the other 5% to your supplier,
I am chinese , i know them ,for the 5 % money, they must help you solve your ploblem ,but the package is broken,no manual,no..... if you do not pay for them ,they also have no choice

[Micky-ttt]

Thanks for your reply
If you know somebody to help me or you have Idee what I can try pls. post.
Meanwile I try, and try, and try.....as I have more CNC machines up to 5 axis
HG I hope to catch the worm after invest a lot of time.....but if without help or support of supplier I will make a nice long weekend with my wife using the 5% ... but sure not transfer to them...

[Micky-ttt]

Hi David

I made it . if anybody have same Problems pls. check the USB Port on
the offline control pad first, then check cable in control desk.
:cheers:

[david021688]

Congratulations :cheers: