549,954 active members*
2,857 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    May 2008
    Posts
    648

    Turret does not find tool 4 T0404

    It will index to any other tool except tool 4.

    On the main screen, I can see T04 but the turret will not rotate.

    If I ask for any other tools, the turret will index without any problem, any idea.

    Thanks, Jeff

  2. #2
    Registered
    Join Date
    Aug 2016
    Posts
    122

    Re: Turret does not find tool 4 T0404

    Sounds like you might have a short for tool 4. With the turret at say tool 1, you should have 0v DC when measuring from J13-3 (tool 1) to J13-11 (0v). Without moving the turret also measure from J13-6 (tool 4) to J13-11. If you have 0v from J13-6/J13-11 then you do have a short. There's a terminal strip inside the back of the turret, you can unhook J13-6 (T4) on first the turret side then the control board side and see which gives you 0v between J13-6 and J13-11 to determine if the short is in the cable or the turret. If it's shorting in the turret, that will be... fun...

  3. #3
    Registered
    Join Date
    May 2008
    Posts
    648

    Re: Turret does not find tool 4 T0404

    Thanks, your help is appreciated.

Similar Threads

  1. Trying to find the name of this tool....
    By cmar143 in forum General MetalWork Discussion
    Replies: 11
    Last Post: 01-07-2017, 05:44 AM
  2. Where to Find Prefab WRL Tool Files for KMontionCNC & How to Rotate Tool?
    By The New Steve H in forum Dynomotion/Kflop/Kanalog
    Replies: 2
    Last Post: 07-13-2016, 06:02 AM
  3. Aligning turret on a Daewoo Puma 10, 12 tool turret
    By AirChunk in forum Daewoo/Doosan
    Replies: 2
    Last Post: 06-03-2016, 02:37 AM
  4. Automatic tool changer program for a 8 tool turret Diy lathe cnc
    By tessen in forum Dynomotion/Kflop/Kanalog
    Replies: 11
    Last Post: 01-04-2014, 05:05 AM
  5. Tool Turret Fault Alarm on TL-1 with no Turret?
    By Edster in forum Haas Lathes
    Replies: 10
    Last Post: 02-08-2010, 03:35 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •