588,246 active members*
4,364 visitors online*
Register for free
Login

Thread: MB1 won't boot

Results 1 to 2 of 2
  1. 04-19-2007, 09:12 PM #1
    daveelc
    daveelc is offline Registered
    Join Date
    Nov 2005
    Posts
    20

    MB1 won't boot

    Got an MB1 that's got problems.

    It has been sat for a while, haven't had the time to work on it.

    Put a new encoder on the other day and cleaned out the carbon dust from the motors, a previous fault.

    Tried booting from disc as normal, gets to the choose language screen and then nothing happens when you choose 0 for English or any other number.

    I have tried removing/refitting all the plugs and wiring but still the same.

    Any one out there had a similar problem?

    Dave
    Reply With Quote Reply With Quote
  2. 04-20-2007, 02:32 AM #2
    jfc11
    jfc11 is offline Registered
    Join Date
    Apr 2006
    Posts
    113
    Try these guys....I use them and he is real good...nothing but hurcos.....free phone support. http://www.midwestcnc.com/page4.html

    Jim
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Hard Boot Procedure
    By a1a5115 in forum Fadal
    Replies: 4
    Last Post: 01-21-2007, 02:59 AM
  2. 2006 TM-1 won't boot up!
    By Edster in forum Haas Mills
    Replies: 12
    Last Post: 12-07-2006, 02:12 AM
  3. multi-boot two HDs
    By Karl_T in forum Computers / Desktops / Networking
    Replies: 3
    Last Post: 06-21-2005, 05:58 AM
  4. No boot on EZ-Mill DX2 BPT
    By mmm2003 in forum Bridgeport / Hardinge Mills
    Replies: 3
    Last Post: 06-04-2005, 04:28 PM
  5. boot disk
    By spuzzbutt in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 12-01-2004, 02:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules