Quote Originally Posted by skray775 View Post
I can shoot a little iPhone video later and post it.

My belt cover is steel so the mount is bolted to the cover with four 8/32" socket cap screws.

The upper plate is made from two parts of 1/4" aluminum simple because I did not have any 1/2" scrap around. A pair of 6/32" set screws hold the gun in place on the upper mount.

I am attaching the DXF file if anyone wants it.

Operation is simple, grab the gun, push it down, rotate the butterfly lever the direction you want it to spin. My machine is pretty small so it is always easy to reach and there is no enclosure so I did not need a remote air switch to activated it.


thank you for posting this
]