[service_cnc]

Al,
The axis drives are A20B 0009 0320 100 (X Axis)
A20B 0009 0320 07C (Y Axis)
A20B 0009 0320 16E (Z Axis)
A20B 0009 0320 07C (4 Axis)
The mother board is A20B 0008 0410 080

I took the pictures with my cel. phone, If they are not clear , I will bring my camera tomorrow.

I could scratch off the paint , and it say 20M in the servo motors. I also scan the page from the manual I have.

The pictures of the 20M servo motor is the X Axis and the pictures of the 10M are from the 4 Axis, also I took a picture of the mother board and a close up of the F/V chips ( A-PC06).

Thanks,

George.

Hello,

Where I can buy one of these A20B 0009 0320 07C (Y Axis)?

waiting for your replies: [email protected]

[dh08td]

Hello,

Where I can buy one of these A20B 0009 0320 07C (Y Axis)?

waiting for your replies: [email protected]

Can you share me the document to my mail: [email protected]
Thanks

- - - Updated - - -

Al,
The axis drives are A20B 0009 0320 100 (X Axis)
A20B 0009 0320 07C (Y Axis)
A20B 0009 0320 16E (Z Axis)
A20B 0009 0320 07C (4 Axis)
The mother board is A20B 0008 0410 080

I took the pictures with my cel. phone, If they are not clear , I will bring my camera tomorrow.

I could scratch off the paint , and it say 20M in the servo motors. I also scan the page from the manual I have.

The pictures of the 20M servo motor is the X Axis and the pictures of the 10M are from the 4 Axis, also I took a picture of the mother board and a close up of the F/V chips ( A-PC06).

Thanks,

George.

Can you share me the document to my mail: [email protected]
Thanks