548,317 active members*
2,189 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Aug 2016
    Posts
    35

    RFQ Drilled Aluminum bar

    3/4" x 3/4" x 24" aluminum bars (2 needed) drilled as per sketch - holes are drilled 1/2" deep and hole size is so a #8D finish nail can be snuggly inserted into each (#39 drill?).
    Attached Thumbnails Attached Thumbnails AL bar 004.jpg  

  2. #2
    Registered
    Join Date
    Aug 2016
    Posts
    35

    Re: RFQ Drilled Aluminum bar

    Better make it 1/2" thick bars drilled thru. Would have edited request but apparently cannot(?). Also still cannot find out why it keeps saying I am posting from a mobile device when I am not or edit some of my profile info!

Similar Threads

  1. 7075 bar stock turned and center drilled
    By advert in forum RFQ (Request for Quote)
    Replies: 3
    Last Post: 11-04-2016, 04:41 AM
  2. Replies: 8
    Last Post: 02-14-2013, 02:08 AM
  3. 20MM round bar drilled and tapped
    By bp238 in forum RFQ (Request for Quote)
    Replies: 0
    Last Post: 07-22-2011, 12:58 PM
  4. Hex Bar Stock turned and drilled/tapped
    By ez3022 in forum Employment Opportunity
    Replies: 4
    Last Post: 10-01-2010, 12:04 AM
  5. RFQ: UHMW Cut to length and drilled
    By mrbaseball in forum Employment Opportunity
    Replies: 9
    Last Post: 11-10-2005, 12:34 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •